BLAMESHIFTER RELEASE OCT 25th 2026

The ingenious labyrinth of the Blameshifter

At first glance, the Blameshifter looks simple, and the question will arise, “but what does the Blameshifter actually do?” We will explain it to you in detail.

The Blameshifter has 1 input for your guitar signal. This input immediately goes into a very high-quality buffer circuit, which ensures that from that point on the signal loses no quality when routing it to one of the four outputs the Blameshifter has.

When the Blameshifter is off, the signal goes from the input through the buffer to the OUT. This signal is then a buffered signal. When you engage the Blameshifter, you switch the signal to one of the three outputs the severed finger is pointing to.

How are these three outputs switched and usable?

Output 1 on the left side on top of the pedal. When pointing the severed finger to that position, this output can function in two ways. As a send, for example to send the buffered signal to another amplifier, or as an effects loop, because Output 1 also has a return input on the right side of the Blameshifter. The signal from your created effects loop is then engaged, buffered, and comes out of your original output on the left side. If you switch it off again, you deactivate this effects loop. This gives you the ability to engage multiple effects at once without having to tap-dance to switch everything on one by one.

Output 3 functions exactly the same as Output 1, which gives you the ability to create and engage not one but two effects loops with the Blameshifter, or to route the signal to another amplifier.

Output 2 is another little ingenious marvel. Output 2 in the middle sends a signal to another amp and can function as an A/B switch; of course, this output is also buffered. But… on the left side there is a micro switch, where you can choose to use only Output 2 when engaged and bypass your original output, or you can flip the micro switch to also use your original output when engaging Output 2, for example to add an extra amp.

The Blameshifter is a new creation by Dr. No and TvL. Fully handmade and conceived from scratch.

Because Dr. No Effects are made by hand from A to Z by Dr. No himself, Dr. No’s creations are not mass-produced products and are subject to limited availability. Please therefore take into account slightly longer waiting times if a creation is temporarily out of stock in his Labshop. They will then be carefully remade by hand.

The Blameshifter comes with:

Handmade Blameshifter

Hand screen-printed box

Custom foam inlay for protection

Little goodie box with: TvL Guitar Picks, TvL Stickers, Dr. No Stickers, Dr. No Guitar Picks, Dr. No Buttons

Labshop price includes worldwide shipping. Possible customs charges not included and are for the buyer. Read the terms and conditions.